Crestron PRO3快思聪3系主机
| Control Engine | ||
| Core 3 OS™; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs | ||
| Memory | ||
| SDRAM | 1 GB | |
| Flash | 4 GB | |
| Memory Card | expandable storage up to 32 GB (SD™ memory card not included) | |
| External Storage | up to 1 TB using USB mass storage device (not included) | |
| Communications | ||
| Ethernet | 10/100/1000 Mbps; auto-switching; auto-negotiating; auto-discovery; full/half duplex; industry-standard TCP/IP stack; UDP/IP; CIP; DHCP; SSL; IEEE 802.1X; SNMP;BACnet®/IP[2]; IPv4 or IPv6; Active Directory authentication; IIS v.6.0 Web Server; SMTP e-mail client; installer setup via Crestron Toolbox™ or MSIE[3]; supports all e-Control®, Core 3 UI™ XPanel, Crestron Mobile®, Crestron Fusion™ and RoomView®applications | |
| Control Subnet | 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode | |
| Cresnet® | Cresnet master mode | |
| USB | Supports USB HID and USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port | |
| RS-232/422/485 | For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485 | |
| IR/Serial | Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud | |
| Connectors & Card Slots | ||
| S1 – S3 | (3) 3-Series™ control card expansion slots | |
| COM 1 – 2 | (2) 5-pin 3.5mm detachable terminal blocks; Bidirectional RS-232/422/485 ports[4]; Up to 115.2k baud; hardware and software handshaking support | |
| COM 3 – 6 | (4) 3-pin 3.5mm detachable terminal blocks; Bidirectional RS-232 ports[4]; Up to 115.2k baud; software handshaking support | |
| IR - SERIAL OUTPUT 1 – 8 | (2) 8-pin 3.5mm detachable terminal block comprising (8) IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud | |
| RELAY OUTPUT 1 – 8 | (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts | |
| LAN | (1) 8-wire RJ45 jack; 10/100/1000Base-T Ethernet port[4]; Connects to the customer's LAN | |
| CONTROL SUBNET | (1) 8-wire RJ45 jack; 10/100/1000Base-T Ethernet port[4]; Provides a dedicated local network for Crestron devices | |
| USB | (1) USB Type A female; USB 2.0 port for storage devices | |
| MEMORY | (1) memory card slot; Accepts up to 32 GB for memory expansion (SD memory card not included) | |
| I/O 1 – 8 | (1) 9-pin 3.5mm detachable terminal block comprising (8) "Versiport" digital input/output or analog input ports (referenced to GND) [4]; Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1; Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k ohms with pull-up resistor disabled; Programmable 5 Volts, 2k ohms pull-up resistor per pin | |
| NET | (1) 4-pin 3.5mm detachable terminal block; Cresnet master port, outputs power to Cresnet devices[4]; See "Power Requirements" for additional specifications | |
| 100-240V~2.4A 50/60Hz | (1) IEC C14 male chassis plug, main power input; Mates with removable power cord, included | |
| G | (1) 6-32 screw, chassis ground lug | |
| COMPUTER (front) | (1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only | |
| LCD Display | ||
| Display Type | TFT active matrix color LCD | |
| Size | 2.8 inch (72 mm) diagonal | |
| Resolution | 320 x 240 pixels | |
| Functions | Displays configuration menus, control port activity, and other system information | |
| Controls & Indicators | ||
| PWR | (1) Green LED, indicates operating power supplied from AC line | |
| NET | (1) Amber LED, indicates communication with the Cresnet system | |
| MSG | (1) Red LED, indicates control system has generated an error message | |
| HW-R | (1) Recessed pushbutton for hardware reset | |
| SW-R | (1) Recessed pushbutton for software reset | |
| CNPS FAULT | (1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indication | |
| SLOT 1 – 3 | (3) Green LEDs, indicate control cards are inserted in the corresponding slots | |
| Nav Pad | (1) 5-way navigation pad for menu navigation and parameter adjustment | |
| HOME | (1) pushbutton, returns to the home menu | |
| BACK | (1) pushbutton, steps menu back one level | |
| LAN (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity | |
| CONTROL SUBNET (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity | |
| Power Requirements | ||
| Main Power | 2.4 Amps @ 100-240 Volts AC, 50/60 Hz | |
| Available Cresnet Power | 75 Watts (3.125 Amps @ 24 Volts DC) | |
| Environmental | ||
| Temperature | 41° to 113°F (5° to 45°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Heat Dissipation | 45 BTU/Hr with no Cresnet devices, no control cards; 71 BTU/Hr with full Cresnet load, no control cards; See individual control card spec sheets for additional specifications | |
| Enclosure | ||
| Chassis | Metal, black finish, vented top and sides | |
| Faceplate | Extruded metal, black finish, polycarbonate label overlay | |
| Mounting | Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included) | |
| Dimensions | ||
| Height | 3.47 in (89 mm) without feet | |
| Width | 17.28 in (439 mm), 19.00 in (483 mm) with rack ears | |
| Depth | 10.13 in (258 mm) | |
| Weight | ||
| 5.0 lb (2.3 kg) | ||

复制产品链接
长按图片保存/分享
咨询表单:
咨询内容:
你还没有添加任何产品